The Addonics Mixed Media Duplicator is a storage media cloning equipment for making copies of micro SATA HDD/SSD, mSATA SSD, CF or CFast media. It is equivalent to having a CF memory duplicator, a CFast memory duplicator, a mSATA SSD duplicator, a micro SATA hard drive and a micro SATA SSD duplicator all integrated into one. You can mix and match any of these media into the duplicator, thus making it a handy tool for transferring the content among these different media.
The duplicator works stand alone without any computer. It is easy to operate. There is no complicated software to run. Simply insert the source media into the source slot and the target media with equal or larger capacity into the destination slots, then push the copy button to start the copying process.
About this model
This 1:11 Mixed Media Duplicator model allows you to copy from one source media onto as many as eleven (11) target media at one time. Source and target media can be of any of the following: micro SATA HDD/SSD, mSATA SSD, CFast or CF card.
Supported flash media copying optionsSource Destination MDCCM5 MDCCM11 Micro SATA HDD/SSD Micro SATA HDD/SSD Yes Yes Micro SATA HDD/SSD CF memory card Yes Yes Micro SATA HDD/SSD CFast memory card Yes Yes Micro SATA HDD/SSD mSATA SSD card Yes Yes CF memory card Micro SATA HDD/SSD Yes Yes CF memory card CF memory card Yes Yes CF memory card CFast memory card Yes Yes CF memory card mSATA SSD card Yes Yes CFast memory card CF memory card Yes Yes CFast memory card CFast memory card Yes Yes CFast memory card mSATA SSD card Yes Yes CFast memory card Micro SATA HDD/SSD Yes Yes mSATA SSD card CF memory card Yes Yes mSATA SSD card CFast memory card Yes Yes mSATA SSD card mSATA SSD card Yes Yes mSATA SSD card Micro SATA HDD/SSD Yes Yes
Note: Two adapters are included for CF, CFast and mSATA SSD cards in each duplicator. No adapter is needed for micro SATA hard drive or SSD. To copy the maximum number of targets with the same type of memory card will require additional adapters. Example, if you want to copy from one mSATA SSD to eleven mSATA SSD on this model MDCCM11, you will need to buy ten additional mSATA - micro SATA adapters, model # ADMS18SA.
* not compatible with CF media that operates in PIO mode only
Components for the main unit
Storage Tower (ST9), 1:11 HDD Duplicator subsystem (HDU11SAS), 6 units of Dual int. MicroSATA UDD (MS2UDDSA),
Bundled accessories: 2 units of mSATA - micro SATA adapter (ADMS18SA), 2 units of CFast - micro SATA adapter (ADCFASTMS), 2 units of CF - micro SATA adapter (ADMSCF), power cord, user guide